"Regular inspection" is good for the wire rolling machine
Time of issue:
With the rapid development of domestic science and technology, it is a trend for machines to replace labor. It is reflected in all aspects of people's life! Today, let's talk about the wire rolling machine often used in the construction industry!
With the rapid development of domestic science and technology, it is a trend for machines to replace labor. It is reflected in all aspects of people's life! Today, let's talk about the wire rolling machine often used in the construction industry! This kind of machine is mainly used for thread rolling on reinforcement, which is convenient and fast! Or the fully automatic mode, which really saves a lot of things for the workers! Although the wire rolling machine is easy to use, it also needs regular inspection and maintenance, otherwise it will cause damage! Let's talk about it one by one
Any machine can't avoid the passage of time, especially some small problems in the early stage. If you don't pay attention, it is easy to cause big problems over time! The first is the use of coolant, which must be water-soluble. If you use it wrong, it will consume the overall service life of the machine for a long time!
Secondly, the whole machine should be cleaned every three or five times. If the reinforcement is cut and processed for a long time, there will be metal debris. Irregular cleaning will increase the burden on the wire roller and damage the service life of the wire roller. Not only the wheel of the thread rolling machine will be affected, but also the machining accuracy of the thread.
Finally, feed at a uniform speed and do not roll too fast to prevent the blade from breaking. The above three points should be checked regularly. Both the interior of the machine and the operation mode will affect the service life of the wire rolling machine.