NEWS CENTER
Develop Market With High Quality
Operating procedures of wire rolling machine
Time of issue:
2021-09-15
When using and operating the wire rolling machine, each shift must check and clean the machine tool, do a good job in daily maintenance, and maintain the wire rolling machine in order, clean, lubricated and safe.
When using and operating the wire rolling machine, each shift must check and clean the machine tool, do a good job in daily maintenance, and maintain the wire rolling machine in order, clean, lubricated and safe.
I. keep the appearance of the machine tool neat and clean without yellow robe, oil dirt and rust. Keep machine parts and main accessories complete and clean.
2. Keep the working site and pedal of the machine tool clean and tidy. Keep each guide rail surface and sliding surface clean and lubricated; Check whether the guide rail surface, worktable and sliding surface are damaged. Third, keep the oil quantity of each part of the lubrication system sufficient, the oil circuit unblocked, the oil mark (window) eye-catching, and the lubrication equipment clean and complete. Check all oil storage parts, lubrication parts and pipelines (including cooling system pipelines) for leakage.
IV. keep electrical appliances, limit and interlocking devices safe and reliable.
V. timely maintain the equipment as required and make records. Fill in the desk hour record on time every month.
Vi. it is not allowed to change (make) equipment (including accessories) without permission.
VII. Before working, check whether the rotating parts of the machine tool are normal, whether the protective device is complete, and whether there is surplus on the working surface, and add oil to each lubricating part. It can be operated only after confirming that there is no problem.
The eight thread roller must be installed stably. When adjusting and replacing the roller, it must be stopped. When the machine tool is running, it is not allowed to reach into the bed surface to adjust the work object or touch the machine tool.
Nine pairs of knives are not allowed to start, tighten the screws of each part, and tighten the nuts after adjustment.
X. the operator must concentrate and keep his hands away from the running part of the rolling wire to prevent pressing his hands.
Relevant News
MOBILE SITE
XINGGONG MACHINE
TEL: +86-319-7585009
E-mail: info@xingg.com
Website: http://www.xingg.com
Address: Xingjiawan Town Industrial Zone, Xingtai City
copyright © 2022 HEBEI XINGGONG MACHINE MANUFACTURING LTD.