Z28-15 Thread Rolling Machine
It is mainly used for rolling various precision external threads and high-strength standard parts, including ordinary threads, trapezoidal threads and modulus threads.
This machine can be based on user demand is equipped with automatic feeding device.
Keyword:
Tel：
Z28-15 Thread Rolling Machine
Introduction
It is mainly used for rolling various precision external threads and high-strength standard parts, including ordinary threads, trapezoidal threads and modulus threads.
Adape rolling of materials:the elongation is greater than 10%, and the tensile strength is less than 1000N / mm² All kinds of carbon steel, alloy steel and non-ferrous metals.
This machine can be based on user demand is equipped with automatic feeding device.
Product Parameters
| Pressure of roller max | 150KN | Dip angle of main shaft | ±8° |
| Working dia | φ48mm | Spindle speed | 36.47.60.78(r/min) |
| Thread distance max | 4mm | Rolling power | 7.5kw |
| Roller dia max | φ170mm | Hydraulic power | 5.5kw |
| BD of roller | φ54mm | Cooling power | 90w |
| Roller width max | 100mm | Weight | 2400kg |
| Center distance of main shaft | 120-240mm | Size | 1600×1590×1140mm |
Related products
Z28-16 Three-axis Thread Rolling Machine
The machine tool is mainly composed of machine body, three sets of identical thread rolling shaft assemblies, three sets of identical sliding sleeve oil cylinder, hydraulic system, transmission mechanism, speed change mechanism, electrical system, cooling system, etc.
Applicable to diameter measurement in cold state φ 4- φ 36mm straight lines, threads and twills are rolled and formed, and the screw thread roller can be assembled to process the fixed thread and through thread (tooth bar).
This machine can be based on user demand is equipped with automatic feeding device.
The design structure is reasonable and firm, with large active force, low noise, low failure rate, convenient adjustment and no disorderly buckle. With high precision and wide application range, it can roll all kinds of external threads
This machine can be based on user demand is equipped with automatic feeding device.
Z28-80A Aneroid Thread Rolling Machine
It is a special equipment for processing Tongsi (tooth strip), which can be processed φ 4- φ 16mm through wire (tooth strip), especially for the processing of "tightening",can improve the effect of doubling.
This machine can be based on user demand is equipped with automatic feeding device.
This product can be processed both radially and axially. With the corresponding wire roller, it can process ordinary bolts, special-shaped bolts and through thread (tooth bar).
This machine can be based on user demand is equipped with automatic feeding device.
The product has reasonable structure, excellent manufacturing and convenient adjustment. It can be processed radially or axially. It can process all kinds of threads, worms, modular splines, straight grain parts, reticulated parts, polished cylinders, arc bodies and all kinds of rectangular and arc grooves
MESSAGES
MOBILE SITE
XINGGONG MACHINE
TEL: +86-319-7585009
E-mail: info@xingg.com
Website: http://www.xingg.com
Address: Xingjiawan Town Industrial Zone, Xingtai City
copyright © 2022 HEBEI XINGGONG MACHINE MANUFACTURING LTD.